In the air dome structure, the pretension of the membrane  material is an important factor to ensure the stability and safety of the structure. In order to obtain the designed equilibrium state and shape at the construction site, during the process of stretching the membrane, the predetermined membrane tension must be accurately applied to the membrane material. This requires the construction personnel to measure and adjust the membrane tension at any time to avoid stress relaxation areas and stress concentration areas, and to avoid tearing of the membrane material caused by excessive tension.

In addition, one of the characteristics of the membrane material in the air dome building is that its tension will relax with time. If the membrane material relaxes, it will cause the membrane surface to sag and tremble under the action of wind load. When this happens, it is necessary to measure the actual stress in the membrane material to determine the decrease in membrane tension caused by relaxation, and then apply and adjust the membrane tension according to the measurement results.

Before the construction of the air dome structure, it is necessary to ensure the three connections and one leveling of the site, that is, the water connection, electricity connection, road connection and site leveling. This is the premise of construction; Construction drawings are used to carry out relevant data digging and construction. At the same time, details are also important. Details determine success or failure. Often a small matter that is considered small will lead to the seriousness of the construction; and then maintenance after construction is also an important process for whether the project is in good condition. Therefore, many problems need to be paid attention to in the construction of air dome  structure in order to build attractive and safe buildings.